Step 3: Fill in the number of times and choose Repeat. Or, if you want unlimited automated clicks, choose Repeat Until Stopped. Step 4: Put the cursor to the object where you want the automated clicks, then choose Current Location. Step 5: Finally, press F6 to begin the automation. If you have changed the Hotkey from the settings before, press the same button to start.
Hotkey shows next to the Start button. Hotkey works even if the window is in the background. OP Auto Clicker allows you to automate mouse clicks or any key of your choice. These games need continuous mouse clicking while playing. Instead of tapping the mouse for an infinite time, you can use OP Auto Clicker here. In addition, you get unmatchable speed and advantages. This way, you are giving some rest to your fingers and mouse.
Then Yes! OP Clicker just automates mouse clicks. This is not considered hacking. A small window will pop up on the screen after opening the source file. First of all, familiar yourself with all the options you see on the window:. This is the interval time between your clicks. Usually, it is auto-filled with milliseconds, but you can fill it as you want. This section is auto-filled with Repeat Until Stopped unless you want to fill to stop it after certain clicks.
And if you want it, choose Repeat and fill in the number of times you want to click. This is the main point of this process. You can put the mouse cursor where you want automated clicks and choose Current Location. Or you can Pick Locations in XY coordinates which is quite tricky for a beginner.
If you want to change the Hotkey button to start and stop, go to Hotkey settings on the bottom left corner of the OP Auto Clicker window. Then press OK to make the change. I still have Windows on the 14G partition. Is it safe to upgrade the BIOS without the hidden partition? I want to get a newer BIOS to fix the annoying fan issue.
Currently, the only feasible way of doing this is over the network using PXE. If not, what other methods would be suitable? Update: I ended up burning CDs as described and successfully updated everything.
I'd still like to know if there is a way I could do it entirely over the network, though. Everything worked out great! I Downloaded the update file intlbtag. EXE but cabextract was unable to find any cabfiles inside it. I tried running the program via wine and that didn't work either. Finally I ran the program on a windows machine and created a boot floppy. Then I went through the the process of converting the floppy to a bootable cd via linux and that worked like a charm.
The cd successfully updated the minipc card's firmware. Everything worked but I ended up needing a windows box to do it. Could this have been done without windows? The appropriate firmware installation program for the wlan card in my R32 can be extracted using cabextract as described in the article.
It contains besides some installation programs a disk image 1awg06ww. IMG that seems to be a simple dos boot disk. This image contains 3. Trying to load them to RAM yields:. What bothers me is, that the upgrade is for many different parts of the combo card. Does anyone have an opinion on whether this could work? OK, I took the risk and successfully upgraded my station firmware, BUT when I tried to upgrade the primary firmware the system froze!!!
The thinkpad won't start up with the miniPCI card inserted and all efforts to reflash it using the original DOS boot image failed!!! Thinkpad r32 owner here. I want to upgrade the firmware as well. If you need any information just send an email to haftbar[a]gmail. The Downloads section is rather long. The problem is the instructions are not very clear about this.
They also state that I should upgrade the Control Program first. But if this works then they are actually compatible and there's a contradiction. Am I missing something? I just want to make sure I don't end up with a non-functioning unit. Maybe there should be a note about this in the article?
Or maybe I'm the only one who is this stupid :. Update: I talked to Lenovo support. The situation apparently is that though the description says that the newer control program is not compatible with the older BIOS, they are not so incompatible as to cause the machine to stop working so it is actually possible to use incompatible versions of BIOS and control program.
In fact according to the support person it makes no difference if the BIOS is upgraded before the control program or vice versa. So I upgraded the control program using the executable running in Windows XP, which rebooted the computer to perform the upgrade and then I booted Windows again to upgrade the BIOS in the same manner and it all worked fine. If anyone reading this finds it useful maybe you can put it in the article?
Or if you find it superfluous just delete this section. The diskette in the default drive will not run on this system. Your system is now locked. And I don't know enough about T2x-series hardware to hazard a guess i.
At first I thought this might be a Frankenstein ThinkPad with a T21 case and a T20 logic board - I did buy it used, after all - but it does have an MHz processor, which was never an option for the T20 both the BIOS and Linux report it as such , and all the other equipment checks out except for the hard drive, which was replaced with a GB model.
IMG from the T22 1. Not sure if this is the right place, but Does anybody know what the formats for the various files are in the bios package or, even better, the bios.
I'm getting progressivel lower and lower level in figuring out just what happens when the computer boots, and the BIOS is the last step BTW, I have an x60s. It is a binary dump. Sometimes, there is junk in the start of the file.
This should be data enough for you to figure out what you need. I tried to flash my ThinkPad 's bios with catastrophalic outcome; now the machine is unable to boot.
I, being overly stupid and too self-confident, ignored all warnings about the media containing the bios image not being write-protected I used one partition of the disk, in which I had installed FreeDOS. During the updating process, the machine started to write screens full of random characters in cyan coloured background. At that point I knew it was b0rked. He also said that because my machine is very old, there are probably not safeguards like dual bios or emergency bios update from floppy disk on boot.
In ThinkWiki there seems to be no page about bios flashing gone bad and restoring the machine to working condition. Or is there? I'd be grateful for any references.
0コメント